Wesham sits right next to Kirkham, so we usually cover the two together and the property types are much the same. Openings formed, chimneys lined, oak beams and slate hearths set, tested and signed off across Wesham and the PR4 3 postcodes around it.
Wesham mixes older village property that still has its chimneys with newer estate housing built without one, so roughly half the jobs here are a liner into an existing stack and half are a twin wall system from scratch. In practice most of what we are called out for around Wesham is terraced and semi-detached stove installs, with everything else on the list available alongside it.
A woodburner fitted properly is one visit from an empty chimney breast to a stove burning in front of you.
/02A multifuel stove has a raised grate and an ashpan underneath, so it will burn smokeless fuel as well as wood.
/03Most of the work in a good stove installation happens before the stove arrives.
/04The flue is the part of the installation nobody sees and the part that decides whether the stove draws, stays clean and stays safe.
/05The beam and the hearth are what turn an opening with a stove in it into a fireplace.
/06The inside of the chamber is what you actually look at when the stove is lit.
/07Two very different looks from the same job.
/08Victorian chequer, patterned encaustic, plain slate and quarry tiled hearths, laid to a set out that lands the pattern centrally on the opening rather than wherever the first tile happened to go.
Across Wesham (PR4 3) it is mostly terraced and semi-detached stove installs, flexible liners and slate hearths. Wesham mixes older village property that still has its chimneys with newer estate housing built without one, so roughly half the jobs here are a liner into an existing stack and half are a twin wall system from scratch. Every job starts with a free survey of the actual chimney breast and the stack, because a price given over the phone for work like this is a guess.
No. Travel is included in the price. Wesham is about 11 km from our Blackpool base, which is well inside the patch we cover as a matter of course, so you are paying for the stove and the work rather than for the van.
Yes. Wesham sits right next to Kirkham, so we usually cover the two together and the property types are much the same. We are happy to talk through the kind of installs we have done near Garstang Road North when you call, and to explain how we would approach yours.
It splits the work in two. Older property around Wesham generally has a chimney, so it is a lining job. Newer estate housing there was built without one at all, which means a twin wall insulated flue system either up the gable or internally through the roof. The second is a bigger job and it is the only way to get a real fire into a house that was never designed for one, which is why we do a lot of it out this way.
A clean install into a sound existing chimney is usually a single day on site in Wesham. Opening a blocked breast, rebuilding the chamber, fitting a beam and hearth and making the plaster good runs to two or three days, and a twin wall system through the roof is normally two. You are told which of those yours is at the survey, along with the price, before anything is committed.
That is the order we would rather do it in. The survey tells you what the chimney can take, whether it needs a liner or a twin wall system, what size appliance the room actually wants and what the builder work will cost. Choosing a stove first and finding out afterwards is how people end up with something that is too big for the room or will not fit the opening.
Yes. The installation is notified through the HETAS scheme, so you get a certificate of compliance with Part J of the Building Regulations without needing a separate building control inspection. Keep it with the house paperwork, because it is what a surveyor, a solicitor and your insurer will ask to see.
Send a photo of the chimney breast and David will come back with a price.